Mercedes-Benz S-Class 2019 Operator's Manual page 502

500 Display messages and warning/indicator lamps
Display messages
Off
É
ABC Vehicle Rising Please
Wait Briefly
Road Surface Scan Inopera-
tive
ABC Malfunction Stop Vehi-
cle
ç
- - - mph
ç
Possible causes/consequences and
* The vehicle level is too low. The vehicle is raised to the selected vehicle level.
Wait until the display message disappears before pulling away.
#
* The ROAD SURFACE SCAN is malfunctioning.
Drive on carefully.
#
Visit a qualified specialist workshop.
#
* Active Body Control is malfunctioning.
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not
#
continue driving under any circumstances.
Consult a qualified specialist workshop.
#
* Active Distance Assist DISTRONIC cannot be activated as not all activation conditions have been fulfilled.
Comply with the activation conditions of Active Distance Assist DISTRONIC (
#
* If you activate the accelerator pedal beyond the Active Distance Assist DISTRONIC setting, the system will be put
into passive mode ( page 212).
→
M M Solutions
page 204).
→