Mercedes-Benz S-Class 2019 Operator's Manual page 294

292 Multimedia system
Generating a WPS PIN
Select ¥ Connect via WPS PIN Genera-
#
tion.
Enter the PIN shown in the media display on
#
the device to be connected and confirm.
Connecting using a WPS PIN
Select ¥ Connect via WPS PIN
#
Select Enter WPS PIN.
#
Enter the PIN that is shown on the external
#
device's display on the multimedia system.
Select Continue.
#
Connecting using a button
Requirements
This function is only available in a Wi-Fi fre‐
R
quency of 2.4 GHz.
Select ¥ Connect via WPS
#
Press the WPS button on the device to be
#
connected or select Connect.
Select Continue in the multimedia system.
#
Connecting using a security key
Select Connect Device to Vehicle
#
A security key is displayed.
Select the vehicle from the device to be con‐
#
nected. The vehicle is displayed with the
SSID MB Hotspot
Enter the security key which is shown in the
#
Input.
media display on the device to be connected.
Confirm the entry.
#
Connecting using NFC
Select Connection via
#
Activate NFC on the mobile device (see the
#
manufacturer's operating instructions).
Bring the mobile device into the NFC area of
#
the vehicle (
Select Done.
#
The mobile device is now connected to the
PBC.
multimedia system hotspot via NFC.
Generating a new security key:
Select Set Up
#
Hotspot.
XXXXX.
NFC.
page 332).
→
Hotspot.
Select Generate Security Key.
#
A connection will be established with the
newly created security key.
To save a security key: select Save.
#
When a new security key is saved, all existing
Wi-Fi connections are then disconnected. If
the Wi-Fi connections are being re-estab‐
lished, the new security key must be entered.
Managing COMAND Touch devices
Requirements:
The COMAND Touch app is installed on the
R
external device (e.g. tablet or smartphone).
Wi-Fi is activated ( page 290) and the mul‐
→
R
timedia system is configured as a Wi-Fi hot‐
spot ( page 291).
→
Multimedia system:
System COMAND Touch
, .
Connecting and authorizing a new device
Select Authorize a New Device.
#
Select Connect New Device.
#