Mercedes-Benz S-Class 2019 Operator's Manual page 296

294 Multimedia system
% If you are using Arabic map data, the text
information can also be shown in Arabic on
the navigation map. To do so, select
the language from the language list. Naviga‐
tion announcements are then also made in
Arabic.
Setting the distance unit
Multimedia system:
System % Units
, .
Select km or mi.
#
In the multifunction display of the Instrument
#
Display, switch the Additional Speedometer
display on O.
Data import and export
Data import/export function
The following functions are possible:
Transferring data from one system or vehicle
R
to another system or vehicle.
Creating a backup copy of your personal data
R
and loading it again.
Protecting your personal data against unwan‐
R
ted export with PIN protection.
as
% Please note that the NTFS file system is not
supported. The FAT32 file system is recom‐
mended.
Importing/exporting data
* NOTE Loss of data due to premature
removal
Do not remove the data storage
#
medium when data is being exported.
Mercedes-Benz is not liable for any loss of
data.
Requirements:
The vehicle is stationary.
R
The ignition is switched on or the vehicle has
R
been started.
The SD card is inserted (
R
USB device is connected (
Multimedia system:
,
Select
#
Importing
Select a data storage medium.
#
A prompt appears asking whether you really
wish to overwrite the current data. If data
originates from another vehicle, this is recog‐
nized during data reading.
The multimedia system is restarted once the
data has been imported.
% Current vehicle settings can be edited after
the import.
Exporting
If PIN protection is activated, your PIN is reques‐
ted.
Enter the four-digit PIN.
#
Select a data storage medium.
#
page 355) or the
→
The data is exported. The data export may
page 358).
→
take several minutes.
System System Backup
.
Import Data or Export Data.