Operating the front passenger seat and rear
seats via the memory function in the rear
passenger compartment
Requirements:
To select the front passenger seat: the power
R
supply is switched on.
Storing
Front passenger seat adjustments and rear seat
adjustments for up to three people can be
stored and called up using the memory function
in the rear passenger compartment.
The following settings can be stored for the front
passenger seat:
Position of the seat, backrest and head
R
restraint
The following settings can be stored for the rear
seats:
Position of the seat, backrest and head
R
restraint
Active multicontour seats: the seat side bol‐
R
sters of the seat backrest as well as the con‐
tour of the seat backrest in the lumbar and
shoulder regions
Seat heating: distribution of the heated sec‐
R
tions of the seat cushion and seat backrest
The following settings are also stored to a mem‐
ory position, if the indicator lamp in the v
button lights up:
Position of the footrest of the front
R
passenger seat, if available
Position of the screen, if available
R
Using the preset position buttons, you always
store the current setting of each seat.
Seats and stowing 119
Press button 1.
#
The rear seat is selected if the indicator lamp
in the button does not light up.
Adjust the rear seat using the buttons in the
#
door control panel (
page 97).
→
Press button 1.
#
When the indicator lamp lights up, the front
passenger seat is selected.