Press down cup holder base
#
until it engages.
Press both retaining clips
2
#
cup holder insert upwards approximately
0.6 in (15 mm).
Press button 1.
#
Cup holder base
3
raises.
Remove the insert from the rear armrest
#
completely.
Installing the insert
* NOTE Damage to the wooden trim
The wooden trim can be damaged by insert‐
ing the cup holder insert.
Make sure that the cup holder insert
#
has been inserted into the recess cor‐
rectly.
3
in the middle
and pull the
Seats and stowing 133
Make sure that cup holder base
#
upper position.
Place the cup holder insert into the recess in
#
the rear armrest such that button
facing forwards.
Press the cup holder insert down.
#
Press outer ring
3
of the cup holder insert
#
until the cup holder insert engages audibly.
Switching the cooling or heating function for
the temperature-controlled cup holder on or
off
When the heating function is used, the metal
insert of the cup holder is heated. For this rea‐
son, you must not reach into the cup holder
insert.
2
is in the
1
is