Mercedes-Benz S-Class 2019 Operator's Manual page 459

Table of Contents

The wear patterns on the front and rear wheels

Front wheels wear more on the shoulder of

Rear wheels wear more in the center of the

On vehicles that have the same size front and

rear wheels, rotate the wheels according to the

intervals in the tire manufacturer's warranty

book in your vehicle documents. If this is not

available, rotate the tires every

3,000 to 6,000 miles (5,000 to 10,000 km),

depending on the wear. Ensure that the direction

of rotation is maintained.

It is imperative to observe the instructions and

safety notes on "Changing a wheel" when doing

so Preparing the vehicle for a wheel

Notes on storing wheels

When storing wheels, observe the following

After removing wheels, store them in a cool,

dry and preferably dark place.

Protect the tires from contact with oil, grease

Overview of the tire-change tool kit

Apart from some country-specific variants, vehi‐

cles are not equipped with a tire-change tool kit.

For more information on which tire-change tools

are required and approved for performing a

wheel change on your vehicle, consult a qualified

specialist workshop.

Required tire-change tools may include, for

Alignment bolt

Wheels and tires 457

The tire-change tool kit is located under the

trunk floor.

Alignment bolt

Jacking support

Folding chock

Show Quick Links

Table of Contents