Mercedes-Benz S-Class 2019 Operator's Manual page 500

Table of Contents

Advertisement

498 Display messages and warning/indicator lamps
Display messages
Blind Spot Assist Not Avail-
able When Towing a Trailer
See Operator's Manual
É
Stop Vehicle Vehicle Too
Low
Possible causes/consequences and
If you hear scraping sounds, pull over and stop the vehicle safely, paying attention to road and traffic con‐
#
ditions, and set a higher vehicle level if possible.
Do not drive at speeds greater than 50 mph (80 km/h).
#
Visit a qualified specialist workshop.
#
* When you establish the electrical connection to the trailer, Blind Spot Assist is unavailable.
Press the left-hand Touch Control and acknowledge the display message.
#
* You have pulled away despite the vehicle level being too low.
Pull over and stop the vehicle, paying attention to road and traffic conditions.
#
The vehicle is raised to the selected vehicle level.
Wait until the display message disappears before pulling away.
#
If the display message does not disappear and a warning tone also sounds, AIRMATIC is malfunctioning:
Do not drive faster than 50 mph (80 km/h) and consult a qualified specialist workshop immediately.
#
* NOTE The tires of the front axle or the front fenders could be damaged by large steering movements
Avoid large steering movements while driving and listen for scraping sounds.
#
If you hear scraping sounds, pull over and stop the vehicle safely, paying attention to road and traffic con‐
#
ditions, and set a higher vehicle level if possible.
M M
Solutions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S 450 4matic 2019S 560 4matic 2019S 450 2019

Table of Contents