Mercedes-Benz S-Class 2019 Operator's Manual page 104

102 Seats and stowing
Removing the head restraint
Fold head restraint bar covers
#
the rear.
Hold front passenger head restraint
#
tightly.
Pull adjuster lever 3 towards the rear and
#
hold it in this position.
Remove front passenger head restraint 1.
#
Release adjuster lever 3.
#
Red pin 4
Press down red pin 4.
#
Fold covers
#
Inserting the head restraint
2 towards
1
Fold head restraint bar covers
#
the rear.
protrudes from the adjuster lever.
2 forwards and close them.
2 towards
Pull handle 3 towards the rear.
#
Red pin 4 protrudes from the adjuster lever.
Insert front passenger head restraint
#
the brackets.
The front passenger head restraint must
engage on both sides.
Press down red pin 4.
#
If pin 4 can be pressed down and is then no
longer visible, the front passenger head
restraint has engaged correctly.
Fold covers 2 forwards and close them.
#
The front passenger head restraint folds into
position automatically.
Moving the front passenger seat into the
normal position (chauffeur mode)
Requirements:
To select the front passenger seat: the power
R
supply is switched on
The front passenger head restraint is instal‐
R
led
1 into