Mercedes-Benz S-Class 2019 Operator's Manual page 297

Activating/deactivating PIN protection
Multimedia system:
System PIN Protection
, .
Setting the PIN
Select Set PIN.
#
Enter a four-digit PIN.
#
Enter the four-digit PIN again.
#
If both PINs match, PIN protection is active.
Changing the PIN
Requirements
A current PIN must be set.
R
Select Change Settings.
#
Enter the current PIN.
#
Select Change PIN.
#
Set a new PIN.
#
Activating PIN protection for data export
Select Change Settings.
#
Confirm with the PIN.
Select Protect Data Export.
#
Activate O or deactivate ª the function.
Unblocking the PIN
Requirements:
There is an Internet connection.
R
A Mercedes me account exists at http://
R
www.mercedes.me.
The Personalization service is active
R
( page 296).
→
If the PIN has been entered incorrectly three
times, the PIN will be blocked. You can have a
single-use password sent to you via the
Mercedes me connect online portal to reset the
PIN protection.
Select Unblock PIN.
#
Enter the single-use password.
#
PIN protection is reset, and you can set a
new PIN.
% Alternatively, you can have PIN protection
reset at an authorized Mercedes-Benz Cen‐
ter.
Multimedia system 295
User profile
Setting a user profile
Multimedia system:
System g Personalization
, .
Displaying a user profile when starting
If this function is active, a prompt appears when
starting the system asking which user profile to
use.
Select Display Profile Selection after
#
Activate O or deactivate ª the function.
#
Selecting a user profile
Select Guest Profile or individual profile #.
#
% Some settings from the user profile are only
loaded when the vehicle is stationary or
when the ignition is switched on.
Automatic synchronization
Each time the ignition is switched off or on, the
individual user profiles are synchronized on the
multimedia system and on the server. This
ensures that the latest user profiles are always
available.
Start.