Maintenance; Adjusting The Fertiliser Placement - horsch Tiger AS Series Operating Instructions Manual

The fertiliser is guided from the distribution tower
through a hose system to the tines.
1
2
3
Tiger with fertiliser distributor
1 Hose system
2 Distributor tower
3 Fertiliser tubes on tines

Maintenance

Check the distributor regularly for foreign
¾
objects.
Check hoses and distributor covers for tight
¾
fit and leak tightness. Pressure losses lead to
non-uniform transverse distribution.
Check hoses for tight fit. They should not be
¾
sagging.
Replace worn or damaged hoses.
¾
54

Adjusting the fertiliser placement

The fertiliser placement optionally takes place
by the coulter into the ground,
¾
behind the coulter on the surface of the field,
¾
approx. half each into the ground and on the
¾
field surface.
A
Flap to adjust the fertiliser placement
Press the flap (A) down and let it click into
¾
place at the desired position.
Adjust the flaps on all tines equally.
¾
Three positions of the flap
1. Placement into the ground
2. Placement on the field surface
3. Placement in the soil and on the field surface
1
2
3