Adjust Serial Interfaces Mode - Thies CLIMA DLx-MET Instructions For Use Manual

Mean storing cycle
Extreme storing cycle
1 min
2 min
3 min
4 min
5 min
6 min
10 min
12 min
15 min
20 min
30 min
1 h
2 h
3 h
4 h
6 h
Table 4: Summary over memory time periods with 10 channels

3.2.5 ADJUST SERIAL INTERFACES MODE

According to following Table 5 COM2 and COM3 can be switched off (lowest power consumption)
or adjusted for the input of serial sensors and output of telegrams. It is not possible to set both
serial interfaces to the same priority (e.g. COM2 to SIF001 and COM3 to SIF002). With this settings
the number of channels can be changed and in this case the ring memories (mean and extreme)
are new initialised.
To start the setting with the keys the procedure like sensor configuration (ref. to chap. 3.2.3) has to
be done.
Remarks:
Before change this settings save the measuring data of the logger!
In case of changing the number of channels the old mean and extreme data
is no more available!
The baudrate and mode (RS232 or RS485) parameters of a sensor must be same
as the corresponding serial port of the datalogger (COM2 or COM3).
Mean value time period
[day]
28.8
57.6
86.4
115
144
172
288
345
432 (1.1 a)
576 (1.5 a)
864 (2.3 a)
1729 (4.7 a)
---
---
---
---
31 - 56
Extreme value time period
[day]
2.7
5.4
8.1
10.8
13.5
16.2
27
32
40
54
81
162
325
487 (1.2 a)
650 (1.7 a)
975 (2.6 a)
021579/06/09