PM SERIES
3) Pressing "scroll" button, you may circulate all messages from the first one to the last
one then returns back to the first one and vice versa.
4) All alarm codes are present when abnormal behavior(s) occur(s).
4.3.3 Monitoring Module Control Panel
Monitoring module control panel is at UPS top. Through this control panel and LED, the operator
may monitor all measured dates, UPS & battery status, and alarm events.
(1) Communication panel fixed screw
(2) Intelligent slot 1 : insert SNMP card or Dry contact card
(3) Intelligent slot 2 : insert SNMP card or Dry contact card
(4) RS485 port 1/2
(5) BAT_T port 1/2 : connect battery temperature sensor box
(6) Dry contact : Pin1-12Vdc, Pin2- DRY_GENER , Pin7- BP_O, Pin8- BP_S
(7) RS232 port
(8) EPO button
(9) REPO port : Remote EPO connect port
(10) LED indication
(11) Function key
(12) LCD port : connected to LCD panel
CAUTION!
The LEDs mounted on the mimic flow chart represent the various
power paths and current UPS operational status.
UDD-SD-125/ Release Date: 20.01.2015/Rev No: 0/Rev.
Date
:
43