1. Manuals
  2. Brands
  3. MAKELSAN Manuals
  4. UPS
  5. 1K
  6. User manual

MAKELSAN 1K User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

MAKELSAN UPS

1 BRIEF INTRODUCTION

1.1 Prolegomenon
The product is designed specially aiming at the requirement of MINI and MICRO
level computer with exquisite quality and excellent function, easy to operate. With the
development of customer office automatism and computerism, considering the bulk and
the position of positing space, the noise disturbance to personnel in office, the light,
thin, short and small product is our design direction, and we stress low noise. So this
product is optimum supply power partner for office and makes you can attain optimal
clean power quality.
1.2 Five design points
1. Small bulk and no occupation space
2. Light weight and convenience to transit
3. Beauty and nature, easy to install
4. Convenient to maintain and easy to operate
5. Package material with environment protection and no pollution to environment
1.3 Note
The manual makes you can operate and maintain the system easily. To normally exert
all functions of the system, please note the following:
1. Read the manual carefully before use
2. Perform the operation strictly according to operating process
3. Place the equipment carefully and lightly when moving the equipment
4. Install the power according to illumination in the manual
5. Please do not open the cover to avoid injury caused by electrical shock
6. Please charge batteries once every a period if no used for long time
7. Do not use UPS on the condition of overload to avoid UPS fault
8. Please carefully keep the manual for the future reference
9. Please handle the system according to "ABNORMITY HANDLING PROCESS" if
there presents any abnormal phenomenon in machine.
10. Please keep UPS neatness and cleanness
-1-
BRIEF INTRODUCTION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MAKELSAN 1K

Summary of Contents for MAKELSAN 1K

  • Page 1: Brief Introduction

    MAKELSAN UPS BRIEF INTRODUCTION 1 BRIEF INTRODUCTION 1.1 Prolegomenon The product is designed specially aiming at the requirement of MINI and MICRO level computer with exquisite quality and excellent function, easy to operate. With the development of customer office automatism and computerism, considering the bulk and the position of positing space, the noise disturbance to personnel in office, the light, thin, short and small product is our design direction, and we stress low noise.

  • Page 2: Configuration And Function

    CONFIGURATION AND FUNCTION MAKELSAN UPS CONFIGURATION AND FUNCTION Front panel Welcome screen WELCOME Display of system status _Pro AC: IN BAT: OK Note: AC indicates utility; BAT indicates battery; AC: IN indicates utility power is normal; AC: LOSS indicates utility power is abnormal;...
  • Page 3 MAKELSAN UPS CONFIGURATION AND FUNCTION Display of input voltage value INPUT VOLTAGE 220V Display of output voltage value OUTPUT VOLTAGE 220V Display of input frequency value INPUT FREQUENCY 50HZ Display of output frequency value OUTPUT FREQUENCY 50HZ Display of battery voltage value...
  • Page 4 CONFIGURATION AND FUNCTION MAKELSAN UPS 2.2 Appearance 8 LCD cycle display switch button: digital signal display items switch button. 9 UPS switch button: UPS general switch button. (1) Turn on UPS inverter by pressing the "ON" key. UPS convert to UPS inverter power output 20s later, UPS pure AC output power is supplied by UPS internal power supply equipment.
  • Page 5 MAKELSAN UPS 11 Wiring inlet/outlet hole: Wiring inlet/outlet hole of input, output and battery pack. 12 DB-9 communication interface receptacle Standard communication interface between UPS and computer. 13 Power switch: Power switch controls input, output and battery power switch at the same time.

  • Page 6: Placement Notes

    MOVEMENT HANDLING MAKELSAN UPS 3 PLACEMENT NOTES 3.1 Transit or move 1. Please dismantle all barge connection firstly. (First turn off before performing) 2. Place lightly and carefully, forbid to hit. 3. Please do not move UPS inverted. 3.2 Placement 1.
  • Page 7 PLACEMENT NOTES MAKELSAN UPS 3. Do not install UPS under sunlight, drain and damp place. (Figure 6, 7) 4. Please keep away from fire source and high temperature to avoid over-high temperature. (Figure 8) 5. Do not lay goods on the UPS. (Figure 9)

  • Page 8: Installation

    INSTALLATION MAKELSAN UPS 7. Running environment temperature: 4 INSTALLATION 4.1 Input 1. Prohibit using general household socket, because the Max. current of general socket is 15A, the socket may be burned down because of overload.
  • Page 9 INSTALLATION MAKELSAN UPS 2. Please connect UPS input terminal to utility power in nearby switchboard. Figure 3. Position and way of connect (1) Remove two screws with "+" screw-driver (Figure 12) (2) Open the back panel and inspect the wiring terminal below the power switch.
  • Page 10 INSTALLATION MAKELSAN UPS -10-...
  • Page 11 INSTALLATION MAKELSAN UPS -11-...
  • Page 12 INSTALLATION MAKELSAN UPS 6. Please connect power correctly Simple identification way to power polarity: (1) Live (L): There is 220V relative to other two holes. (2) Neutral (N): there is 220V relative to the Live, there is 0.5-2V relative to the ground.
  • Page 13 INSTALLATION MAKELSAN UPS 13. Please follow the electrician law when installation. 14. Avoid using the same switch with other equipment when connect to switchboard, try to connect cable to utility terminal. Figure 14. 15. In 3 4W system, please respectively...
  • Page 14 INSTALLATION MAKELSAN UPS 4.2 Output 1. Please refer to output installation principle when installation. 2. Position and way of connection, refer to figure 15. 3. Output power cable is designed according to load current, do not use over-thin cable. Please refer to Table 2 Model Max.
  • Page 15 INSTALLATION MAKELSAN UPS 6. The ground to this unit only acts as reference point, if the ground isn't good, that may cause disturbance and false datum management, and affect UPS and computer, please ask professional personnel for handling immediately. 7. User offers a good grounding system.

  • Page 16: Operation Process

    OPERATION PROCESS MAKELSAN UPS 5 OPERATION PROCESS 5.1 Prepare before start-up. To make UPS normally and correctly run, please confirm the following items. (Refer to figure 2) 1. Verify power switch on back panel is on the "OFF" position. 2. Verify the installation position again. (Figure 4 to 10) 3.
  • Page 17 OPERATION PROCESS MAKELSAN UPS 2. Press the "ON" button on front panel. As right figure. The input indicator and the bypass indi- cator are solid on. LCD display is lit on. Output is utility pow- ered via bypass. 3. After 20s, input indicator light on...
  • Page 18 OPERATION PROCESS MAKELSAN UPS matically stop 90s later. UPS will sound alarm every 1s again when battery power is to be exhausted. 5. Utility indicator will be lit on when UPS input power source is resumed. Press the LCD display cycle switch button to switch items displayed, inspect if the display value is normal, thus first startup procedure has been completed.

  • Page 19: Status Handling

    STATUS HANDLING MAKELSAN UPS 6 STATUS HANDLING 6.1 symbol signification Note: If indicator light flash, the flash period is synchronal with that of buzzer sounds 6.2 UPS run status indication and handling ways when normal Please refer to indicator on UPS panel, LCD indicator value and buzzer sound, you can know if UPS running is normal, if abnormal, please refer to the handling way accord- ing to panel indicator status.
  • Page 20 STATUS HANDLING MAKELSAN UPS 2. panel indicator status is as the right figure (1) UPS running status: Utility is normal, UPS runs normally and battery capacity is above 90%. (2) Handling way: needn't handling. 3. panel indicator status is as the right...
  • Page 21 STATUS HANDLING MAKELSAN UPS *Note: the material parameters indicated vary with the machine type. 5. panel indicator status is as the right figure: (1) UPS running status: Utility power is normal and it con- verts to utility mode. UPS don't start up if didn't press the "ON"...
  • Page 22 STATUS HANDLING MAKELSAN UPS 7. panel indicator status is as the right figure: (1) UPS running status: Utility power is normal, UPS runs ab- normally and convert to be utility powered. (2) handling way: Please refer to flow Chart 22 of status handling.
  • Page 23 STATUS HANDLING MAKELSAN UPS 9. panel indicator status is as right figure: (1) UPS running status: Utility power is disconnected and UPS is battery powered. Buzzer beeps once every one second when the battery power will be exhausted. (2) Handling way: UPS will be shut down, please save files and close your computer.

  • Page 24: Movement Handling

    MOVEMENT HANDLING MAKELSAN UPS 7 Movement handling 7.1 UPS system configuration block Figure: figure 23 7.2 UPS's running way when UPS runs normally When UPS runs normally, after high-frequency harmonic noise in utility power is filtered by the filter, on one hand utility power charges battery pack via the inverter and...
  • Page 25 MOVEMENT HANDLING MAKELSAN UPS 7.3 UPS's running way when utility disconnected As figure 25, when utility disconnected, power is battery supplied to the inverter then is sostenuto transmitted to user equipment for using via the static switch and the filter to avoid power disturbance to load.
  • Page 26 MOVEMENT HANDLING MAKELSAN UPS 7.5 Battery and charge 1. When power switch on back panel is on the position of "ON", the batteries can automatically be charged and the charger can charge 90% of the battery capacity in 10 hours.

  • Page 27: Communication Interface

    COMMUNICATION INTERFACE MAKELSAN UPS 7.6 Daily maintenance 1. UPS should be cleaned and maintained termly, avoid any dust to ensure machine life. 2. Please clean UPS lightly with soft cloth, don't use grit for instead for ever. 3. Termly inspect all kinds of connection every month and avoid any hit, looseness or humidity.
  • Page 28 COMMUNICATION INTERFACE MAKELSAN UPS 8.3 The computer interface of UPS offer detailed datum and is suit to net route, workstation, monitoring system, PC, etc. Computer interface: It can sostenuto transmit datum through RS232 communication series port and computer. The datum that UPS offers includes input voltage value, output voltage value, output frequency, input frequency, battery capacity percent, used load percent, UPS internal temperature, etc.

  • Page 29: Specification

    SPECIFICATION MAKELSAN UPS SPECIFICATION Capacity (VA) 6.25K 12.5K AC input Voltage 160~310VAC (AVR) Frequency 50(60)Hz 5% Phase Single Max.current AC output Voltage 220V Frequency 50(60)Hz Voltage stability Frequency stability 0.5% (Disconnection) Wave form SPWM sine wave Power factor Distortion < 3% linear load)
  • Page 30 SPECIFICATION MAKELSAN UPS Capacity (VA) 6.25K 12.5K Internal protection equipment LCD panel UPS automatically shutdowns when battery is low power level Battery there is no fuse switch protection When load reaches 110~150% of rating, transfer to bypass after Overload 3s, recover auto.

  • Page 31: Shipping List

    SHIPPING LIST MAKELSAN UPS 10 Shipping list Order Consent Number UPS use manual Intelligent monitoring software Computer port cable -31-...
  • Page 32 SHIPPING LIST MAKELSAN UPS -32-...
  • Page 33 SHIPPING LIST MAKELSAN UPS -33-...
  • Page 34 SHIPPING LIST MAKELSAN UPS -34-...

  • Page 35: Table Of Contents

    Content MAKELSAN UPS MAKELSAN UPS Content 1 BRIEF INTRODUCTION ........... 1 2 CONFIGURATION AND FUNCTION ...... 2 3 PLACEMENT NOTES ..........6 4 INSTALLATION ............8 5 OPERATION PROCESS ........... 16 6 STATUS HANDLING ..........19 7 MOVEMENT HANDLING ........24 8 COMMUNICATION INTERFACE ......

This manual is also suitable for:

2k6.25k10k12.5k3k5k

Table of Contents