Cisco ASA Series Cli Configuration Manual page 2045

Chapter 1 Configuring Anonymous Reporting and Smart Call Home
Subscribing to Alert Groups
An alert group is a predefined subset of the Smart Call Home alerts that are supported on the ASA.
Different types of Smart Call Home alerts are grouped into different alert groups, depending on their
type.
This section includes the following topics:
•
•
Information About the Message Severity Threshold
When you subscribe a destination profile to certain alert groups, you can set a threshold for sending alert
group messages based upon the message level severity. (See
than the destination profile's specified threshold is not sent to the destination.
Table 1-1
Level
9
8
7
6
5
4
3
2
1
0
Information About the Message Severity Threshold, page 1-9
Configuring Alert Group Subscription, page 1-10
Severity and Syslog Level Mapping
Keyword
catastrophic
disaster
fatal
critical
major
minor
warning
notification
normal
debugging
Configuring Anonymous Reporting and Smart Call Home
Equivalent Syslog
Level Description
N/A Network-wide catastrophic failure.
N/A Significant network impact.
Emergency (0) System is unusable.
Alert (1) Critical conditions, immediate attention needed.
Critical (2) Major conditions.
Error (3) Minor conditions.
Warning (4) Warning conditions
Notice (5) Basic notification and informational messages.
Possibly independently insignificant.
Information (6) Normal event signifying return to normal state.
Debug (7) Debugging messages (default setting).
Cisco ASA Series CLI Configuration Guide
Table 1-1). Any message with a value lower
1-9