Cisco ASA Series Cli Configuration Manual page 2163

Appendix 1 Configuring an External Server for Authorization and Authentication
.
Table 1-11
Attribute
bytes_in
bytes_out
cmd
disc-cause
elapsed_time
foreign_ip
local_ip
NAS port
packs_in
packs_out
priv-level
rem_iddr
service
task_id
username
Supported TACACS+ Accounting Attributes
Description
Specifies the number of input bytes transferred during this connection (stop
records only).
Specifies the number of output bytes transferred during this connection (stop
records only).
Defines the command executed (command accounting only).
Indicates the numeric code that identifies the reason for disconnecting (stop
records only).
Defines the elapsed time in seconds for the connection (stop records only).
Specifies the IP address of the client for tunnel connections. Defines the address
on the lowest security interface for cut-through-proxy connections.
Specifies the IP address that the client connected to for tunnel connections. Defines
the address on the highest security interface for cut-through-proxy connections.
Contains a session ID for the connection.
Specifies the number of input packets transferred during this connection.
Specifies the number of output packets transferred during this connection.
Set to the user privilege level for command accounting requests or to 1 otherwise.
Indicates the IP address of the client.
Specifies the service used. Always set to "shell" for command accounting only.
Specifies a unique task ID for the accounting transaction.
Indicates the name of the user.
Configuring an External TACACS+ Server
Cisco ASA Series CLI Configuration Guide
1-39