Advertisement
4
5
Reviewing Setpoint Temperature:
• Press
or
to review the Setpoint temperature.
• Press BL/FROST or wait
3 seconds without key
press to return to normal
operation, room
temperature will be
displayed.
Setting Setpoint Temperature:
• Press
or
to enter Setpoint temperature
setting mode. The Setpoint temperature is
flashing to indicate that it can be changed.
• Release and press
or
again to increase or
decrease the Setpoint temperature by 0.5°C
resepectively.
• Hold
or
for another 2 seconds to enter fast
advance in 4Hz.
• The setting range is 10˚C-35°C in steps of 0.5°C.
• Setpoint Temperature will stop flashing when a
key is pressed, then flashes again once the key is
released.
• Thermostat will return to normal mode after 3-4
seconds if no key is pressed.
When Frost Protection is enabled, setting of
Setpoint temperature is prohibited.
Frost Protection:
• Press and hold BL/FROST for 3 seconds to
activate Frost Protection.
The Setpoint temperature is automatically set to 5°C
to prevent frosting.
Whenever the Frost Protection is activated, the Frost
Protection indicator is animating with the below
sequence in 4Hz
• Press BL/FROST for 3 seconds to de-activate the
Frost Protection, the Frost Protection indicator is
turned off.
LCD Backlight:
• LCD backlight is activated when BL/FR
any key is pressed. The backlight will
automatically turn off 5 seconds after a
released.
• LCD backlight will not operate when ba
low.
• LCD backlight is illuminated throughou
Setpoint Temperature setting.
6
7
Advertisement
