Frost Protection Mode - Salus RT510 Full User Manual

6.5 Frost protection mode

In this mode the setpoint temperature is automatically set to frost setpoint to prevent pipes from frosting. If the room temperature is lower than the frost
setpoint, frost protection will be enabled. To set frost protection mode follow steps below:
1 2
TEST / PAIRING TEST / PAIRING
SELECT SET SELECT SET
Snowflake icon will be displayed if
Press button to turn
frost protection is active.
ON/OFF frost protection.
The Frostpoint temperature can be reviewed by pressing the UP button once, but can only be changed in Installer Mode.
TEST / PAIRING
SELECT SET
15