Table of Contents
Advertisement
Connections
The UP-D9500 can be connected to networks such as LocalTalk and Ethernet, and
to computers equipped with a parallel or SCSI interface.
Notes
• Be sure to turn off the power to all devices before making connections to the
• Connect the power cord last.
• Refer to the respective manuals for connection of the printer to the computer and
Making AppleTalk Connections
Connect the interface cable to either the 10BASE5 or 10BASE-T connector, as
appropriate.
Note
Use only the LocalTalk cable provided by Apple Computer Inc.
Do not connect both 10BASE5 and 10BASE-T cables at the same time.
1
2
computer or peripherals.
other peripheral devices.
EtherTalk
LocalTalk
Connect the power cord.
Turn on the printer power.
Press and hold the POWER switch for about 3 seconds.
15
Preparation
Advertisement
Table of Contents
