Connections - Sony UPX-C21 Operating Instructions Manual

Connections

Power connections
Station
PRINTER
DC IN
DC IN
Ferrite filter
Connect the station and the printer.
Notes
• Turn off the power of each device before attempting to make any
connections.
• Grab the connector at the end of the connecting cable, and firmly insert it
into the socket.
Connect the station to wall outlet.
1
Attach the ferrite filter (supplied) to the DC cord of the AC power
adaptor (supplied).
Release the lock of
Wrap the cord around
the ferrite filter with a
the filter once to hold it
screwdriver or a
in place.
similar tool.
2
Connect the DC cord of the AC power adaptor to the DC IN connector
of the station.
AC power adaptor
(supplied)
3
Connect the AC power adaptor to wall outlet.
Supplying power to the station begins
To stop supplying power to the station
Disconnect the AC power adaptor from wall outlet.
DC cord
AC power cord
(supplied)
to wall outlet
25