Table of Contents
Advertisement
Connections (continued)
18
Preparation
6
Press
, to display the "IP ADDRESS" screen.
7
Set the IP Address.
Increment and decrement the number with the asterisk (*) using the
buttons.
Press the
and
buttons to move the asterisk to the next number to set.
8
When the last number has been set, press the
MASK" screen.
9
Set the Net Mask number in the same manner as in step 7.
10
Press the
button. The IP Address is stored and the display returns to
normal.
11
Turn the printer off.
Press and hold the POWER switch for about 3 seconds.
Connect a cable to either the 10BASE 5 or 10BASE-T interface.
Note
Do not connect both 10BASE 5 and 10BASE-T cables at the same time.
and
button to display the "NET
Advertisement
Table of Contents
