Connections - Sony UP-D72XRS Instructions For Use Manual

Connections

The printer can connect to a computer and so on via the
parallel (IEEE 1284) interface.
Notes
• Connect the AC power cord last.
• When you use the printer in the U.S.A. or Canada, use
the AC power cord supplied. When you use the printer
in a country other than the U.S.A. or Canada, use the
proper AC power cord for your local power system.
• Before connecting the AC power cord, make sure to
turn off the power switches on your computer and any
peripheral equipment.
• Be sure to connect one printer to one computer. Do not
connect two computers to one printer.
• Do not connect the computer to both the PARALLEL
DATA connector and the special connector of the
printer at the same time.
• Grasp the connector at the end of the cable, and firmly
insert it into the socket.
• The parallel data cable should be less than 3 meters
long and should conform to the IEEE1284
specifications for printer cables.
• Cable connection requirements vary depending on
computers and peripherals. For the details of your
installation, please refer to the manuals for your
computer and peripherals.
UP-D72XRS
to -AC IN
AC power
cord
to wall outlet
8
Connections
to PARALLEL DATA
Parallel data cable
(shielded type)
Computer