Table of Contents
Advertisement
Handling Precautions
Storing and Moving
• When the printer is not going to be used for a long time, turn off the power
switch, unplug the power cord from the outlet, and remove the ink ribbon and
paper from the printer for storage.
• Before moving the printer, remove the supplied expendables and return them to
the packaging in which they were originally supplied. Moving the printer with
expendables installed could cause damage.
Condensation
Moisture may condense inside the printer if it is moved to a warm location from a
cold one, or if it is placed in a heated room that is steamy or humid. This is referred
to as condensation. If the printer is operated under this condition, it may
malfunction and be damaged. Therefore, if there is any possibility of condensation,
the printer should be turned off and allowed time to reaqch equilibrium with the
environment.
Cleaning
• Refer to "Printer Maintenance" (page 40) for cleaning inside the printer.
• Before cleaning, always turn the printer off and unplug the power cord.
• To clean the cabinet, wipe with a cloth moistened with water or a solution of
synthetic detergent (after wringing out any excess liquid). Then wipe with a dry
cloth.
• Do not use thinner, cleaning fluid, alcohol or chemically treated cloths, as these
could damage the finish.
7
Introduction
Advertisement
Table of Contents
