Table of Contents
Advertisement
BT800 Hardware Integration Guide
Version 0.2
16 E
U
UROPEAN
NION
The BT800 has been tested for compliance with relevant standards for the EU market. BT800 module was
tested with a 0.5 dBi chip antenna.
The OEM should consult with a qualified test house before entering their device into an EU member
country to make sure all regulatory requirements have been met for their complete device.
Reference the Declaration of Conformities listed below for a full list of the standards that the modules
were tested to. Test reports are available upon request.
17 EU D
ECLARATIONS OF
17.1
BT800 / BT810 / BT820
Manufacturer:
Product:
EU Directive:
Conformity Assessment:
Reference standards used for presumption of conformity:
Article
Requirement
Number
3.1a
Health and Safety
Protection requirements
with respect to
3.1b
electromagnetic
compatibility
Means of the efficient use of
3.2
the radio frequency
spectrum
Declaration:
We, Laird, declare under our sole responsibility that the essential radio test suites have been carried out
and that the above product to which this declaration relates is in conformity with all the applicable
essential requirements of Article 3 of the EU Directive 1999/5/EC, when used for its intended purpose.
Place of Issue:
Date of Issue:
Name of Authorized Person:
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
R
EGULATORY
C
ONFORMITY
Laird
BT800 / BT810 / BT820
RTTE 1995/5/EC
Annex IV
Laird
Saturn House, Mercury Park
Wooburn Green
HP100HH,
United Kingdom
tel: +44 (0)1628 858 940
fax: +44 (0)1628 528 382
July 2013
Andrew Dobbing, Engineering Manager
Reference standard(s)
EN60950-1:2006+A11:2009+A1:2010+A12:2011
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-17 V2.2.1 (2012-09)
Emissions:
EN55022:2006/A1:2007 (Class B)
Immunity:
EN61000-4-2:2009
EN61000-4-3:2006/A1:2008/A2:2010
EN 300 328 V1.8.1 (2012-06)
38
CONN-GUIDE-BT800_v0_2
Advertisement
Table of Contents
