The Sterling-LWB & Sterling-LWB5 SD Card development board is an evaluation and development board for the Laird Sterling-LWB and Sterling-LWB5 module. It connects to a standard SDIO card slot on a host board and can be powered directly from the SD card slot or from an external power supply. Additionally, it brings out all necessary GPIO pins for Wi-Fi operation and all necessary pins for Bluetooth operation including PCM audio pins.
3.1. Interface Connectors The Laird Sterling-LWB and Sterling-LWB5 SD card board has two connectors (J2 and J3) for interfacing with the host development board. This provides all necessary pins to completely connect the module to the host for both Wi-Fi and Bluetooth operation.
BT audio. For detailed information on how to integrate the Sterling-LWB module into an iMX UltraLite development board, refer to the Integrating Laird Sterling-LWB Wi-Fi and Bluetooth with Freescale i.MX 6 UltraLite Evaluation Kit Under Linux How-to Guide available from the Sterling-LWB product page.
All Laird products are sold pursuant to the Laird Terms and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. When used as a tradename herein, Laird means Laird PLC or one or more subsidiaries of Laird PLC.
Need help?
Do you have a question about the LSR Sterling-LWB5 and is the answer not in the manual?
Questions and answers