FLIR PT-602CZ Installation Manual page 40

2 Basic Operation and Configuration
Sensor > Communications > Modules > OSD (On Screen Display)
Use the OSD page to turn on and configure the On Screen Display (OSD) options. It may be desirable
to display text information (such as the name of the camera or the date/time) as an overlay on the
video image. The OSD configuration page allows certain camera-related information to be displayed in
the analog video and in the IP video streams. It is possible to display the following parameters as an
overlay on the video channels: Date, Time, Label, Preset, Menu, and Initial System Info.
The Label can display the Friendly Name (configured on the Product Info page), the Hostname
(configured on the LAN Settings page) or a Custom text string (using the Text parameter after selecting
Custom).
The appearance of each text string can be controlled with the following parameters:
• State (on or off)
• Transparency (on indicates only the letters are displayed, off indicates the letters are displayed
inside an opaque block)
• Color (changes the color of the letters)
• Style Mode (can be Preset, which indicates the information is displayed in certain preset sizes and
locations, or Custom, which requires additional size and location settings)
• Size (text size - small, medium or large)
• Location (preset location on the screen where the information will appear)
The Initial System Info parameters control
how the initial system information is displayed,
such as the IP address and Serial Number. By
default this information is displayed on the
video overlay (analog and IP) for 20 seconds.
427-0038-00-12 Version 110 March 2018 40