FLIR PT-602CZ Installation Manual page 36

2 Basic Operation and Configuration
Scroll down to select an action the camera will perform at startup (power cycle or server reset).
Sensor > Modules > Video
By default, four video streams are enabled for the camera: Video 0, Video 1, Video 2, Video 3. Video 0
and Video 1 are IR streams; Video 2 and Video 3 are visible streams. All video streams are available
for viewing from a client program such as FLIR Latitude, a stand-alone video player, or another VMS.
By default, Video 0 and Video 2 use H.264 encoding while Video 1 and Video 3 use MJPEG encoding.
To modify parameters that affect a particular IP Video stream from the camera, select the appropriate
link (for example, Video 0).
427-0038-00-12 Version 110
Stop and start the server
March 2018
Scroll down
to Save
Select an action
from the menu
36