Maintenance Menu - FLIR PT-602CZ Installation Manual

2 Basic Operation and Configuration
Surveillance > Auto Scan
Relative Auto Scan (Surveillance mode) and Absolute Auto Scan can be started and the parameters
set in the web page, but Absolute Auto Scan can also be started as an option in the Startup mode
when the camera boots. Refer to
2.3.3
When a user logs in as admin, a complete Maintenance menu is available. The Maintenance menu
also provides access to other configuration options. For more information on setting or changing other
camera parameters refer to the Nexus IP Camera Configuration Guide (FLIR Doc #427-0030-00-28).
The basic camera configuration steps are accessed through the Maintenance menu, using the Server
submenu on the left side of the page.The LAN Settings, Date and Time, and Security Options
selections are described below. Generally with these settings it is necessary to save the changes to
make them effective, but it is not necessary to stop and restart the server.
427-0038-00-12 Version 110
Sensor > Devices > Pan & Tilt, pg.

Maintenance Menu

March 2018
To start Auto Scan:
select width and speed
then select Start
Set Autoscan at Startup:
select speed,
select limits,
click Save
35.
28