Set Ip Address Using The Flir Discovery Network Assistant (Dna) - FLIR PT-602CZ Installation Manual

2 Basic Operation and Configuration
Once the camera is connected to a network and powered on, set camera network parameters using
the FLIR Discovery Network Assistant (DNA) software. The FLIR Discovery Network Assistant (DNA)
software does not require a license to use and is a free download from the individual product web page
at: https://www.flir.com/browse/security/thermal-security-cameras/.
2.2.1
The PT-602CZ camera is shipped with an IP address set to 192.168.250.116 with a netmask of
255.255.255.0. Configuring the camera for IP communications generally involves the following steps:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
427-0038-00-12 Version 110

Set IP Address using the FLIR Discovery Network Assistant (DNA)

Connect the Ethernet port of the camera to the existing IP camera network.
Connect a PC or laptop to the same network.
From the PC connected to the camera network, use the DNA utility to discover and display
the camera's current IP address.
a Download the DNA utility.
b Unzip the utility, then double-click to run the executable file (
the VLAN are discovered.
c For additional instructions on using DNA, refer to the DNA User's Manual available in the
Help ( ) link while the software is running.
Click to sort
Select Assign IP to change the default
IP address or select DHCP.
Double-click the camera in DNA's
Discovery List to open the camera's web
server Login page in Internet Explorer or
point your web browser to the camera's IP
address.
Using a web browser, configure the camera
settings, such as camera date/time, and
other parameters, so the camera is
compatible with the existing network.
March 2018
DNA.exe). All the units on
Online manual
Select a filter
Right-click
Select Assign IP
19