Dispenser Diverter Plate Installation - Cornelius, Ed, Df And Db Series - Follett Horizon Elite series Installation Instructions Manual

8.6
Dispenser diverter plate installation – CORNELIUS, ED, DF AND DB SERIES
ICE CHUTE
COVER
10-32 WASHER
CORNELIUS ED, DF AND DB series only
These dispensers require the installation of an ice diverter at the dispenser opening:
§ Disassemble chute assembly
§ Discard factory restrictor plate
§ Replace with alternate diverter plate (supplied)
Cornelius IDC and Flavor Fusion
These dispensers require modifications for compatibility with Chewblet ice. Agitation times must be set to
1 second ON, 1 hour OFF and the ice restrictor plate must be adjusted to the fully open position. See your
beverage supplier for these modifications.
Note: IDC and Flavor Fusion must be nugget-ready. Please contact beverage supplier for installation of ice slide.
HARMONY • RIDE Technology
GATE MOUNTING PLATE
ICE DIVERTER
ICE CHUTE
10-32 NUT
Horizon Elite 710/1010/1410
STORAGE HOPPER
FLANGE EXTENDS INTO
STORAGE HOPPER
THROUGH GATE
OPENING
APPLY RTV TO THIS
SURFACE TO SEAL
TO HOPPER GATE
MOUNTING PLATE
GASKET
21