Page 1
™ ™ Horizon Ice Machine Models with RIDE Technology ™ Installation Instructions for Ice Manager Diverter Valve HCD/HCF1000RMS, HCD/HCF1400RMS, HCD/HCF1650RMS, HCD1000NMS, HCD1400NMS, HCD1650NMS (See model number confi gurator on page 2 for details.) Order parts online www.follettice.com remote condensing Ice Manager Control Panel Ice Manager Diverter Valve...
Page 2
Chewblet ® Ice Machine Model Number Configurations 1400 Icemaker Voltage Series Condenser Application Configuration C 208-230/60/1 (icemaking head) 400 up to A Air-cooled, self-contained V Vision™ S RIDE™ MC Maestro™ Self-contained only. 454 lbs ® Chewblet W Water-cooled, self-contained H Harmony™ (RIDE remote D 115/60/1 (icemaking head) (206kg)
Page 3
Horizon ice machine for use with Ice Manager diverter valve system The Ice Manager diverter valve system delivers ice to two ice storage units enabling a single Follett Horizon ice machine to meet demand for ice at two locations. The system’s sensors monitor ice levels in each storage unit and automatically switch ice delivery to the appropriate location.
Page 4
Unpack Carefully unpack and inspect the contents of your Follett ice machine. Unpack ice machine ➊ ➋ ➌ ➍ 1/2" 1/2" ➎ ➏ ICE MANAGER remote condensing...
Potable water supply • 10-70 psi (69-483kpa) • 45-90 F (7-32 C) • Follett recommends the use of an in-line water fi ltration system (item# 00130286) ➌ Drain • The drain line from the ice machine must have at least 1/4" per foot pitch (6,4mm/0,3m) ➍...
Page 6
Louvered docking assembly Install the louvered docking assembly. Wall bracket accessory Machine stand accessory • Mount louvered docking assembly to wall • Mount louvered docking assembly to bracket accessory machine stand accessory Louvered docking assembly 1-3/4" (44,5mm) 3" (76mm) ➋ 1"...
Undercounter installation requirements Top View ➌ ➊ 1.75" (45mm) min. Access panel/ door on counter 24.5" min. (623mm) 21" min. (534mm No Lip ➋ DOCKING STATION • Position and screw louvered docking assembly to the bottom of counter inside of access panel/ ➊...
Ice transport tube Install the ice transport tube. Ice transport tube installation. ➋ ➍ ➏ Hot Water 160 F (71 C) ➐ ➎ ➊ 1/4" ➌ Ice transport tube tips ➊ • Insulate entire length of ice transport tube ➋ •...
External connections Connect utilities to louvered docking assembly. CAUTION • Plug must be accessible after fi nal installation. Water and drain Refrigerant ➊ ➋ ➊ • Braze supplied expandable refrigerant • Remove access panel if necessary. ➊ lines in place ➊...
Front cover Install front cover to ice machine. Install condensing unit Install ice machine front cover ➋ ➊ • Slide ice machine cover over machine ensuring that tabs on back of cover • Complete installation of condensing unit slip under louvers on back of louvered ➊...
Page 13
Long tube run recommendations ➊ max. 2 ft (.6m) ➋ 1/4" ➊ • Pitch ice transport tube to allow melt water to drain towards ice machine ➋ • Secure insulated ice transport tube at least every 2 ft (.6m) to prevent dips or traps ICE MANAGER remote condensing...
Page 16
Horizon, Maestro, Harmony, Ice Manager, SafeCLEAN, Sani-Sponge, RIDE and Vision are trademarks of Follett Corporation. Chewblet is a registered trademark of Follett Corporation, registered in the US. 801 Church Lane • Easton, PA 18040, USA 00172536R07 Toll free (877) 612-5086 • +1 (610) 252-7301 www.follettice.com...