Air-Cooled Ice Machines Only; Water-Cooled Ice Machines Only - Follett Horizon Elite series Installation Instructions Manual

5.2

Air-cooled ice machines only

➋
§ Rough-in ice machine potable water supply
3/8" push-in connection will be made at shut-off
valve inside machine
§ Remove access panel if necessary
§ Connect the silicone tubing to the ice machine 3/4"
➌
drain barb .
§ Assemble the 3/4" barb x 3/4" FPT to the 3/4" MPT
x 1" slip. Connect the other end of the silicone
tubing to the 3/4" barb
§ Connect the 1" slip fitting to the 1" stand pipe/drain
➎
.
Note: Minimum 8" radius on silicone drain line.
Drain line from the ice machine must have
at least 1/4" per foot pitch (6,4mm/0,3m).
§ Apply Petrol-gel to barbed drain fitting
§ Replace access panel.
12
➊
➌
➏
Minimum 8"
radius
2 ft. x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
➍
3/4" MPT x 1" slip
➎
1" Stand pipe/Drain
➊
➋
.
➍
.
➏
Horizon Elite 710/1010/1410
5.3

Water-cooled ice machines only

➏
➋
➐
. § Rough-in ice machine potable water supply
3/8" push-in connection will be made at shut-off
valve inside machine
§ Remove access panel if necessary
§ Connect the silicone tubing to the ice machine
3/4" drain barb
§ Assemble the 3/4" barb x 3/4" FPT to the 3/4"
MPT x 1" slip. Connect the other end of the
silicone tubing to the 3/4" barb
§ Connect the 1" slip fitting to the 1" stand pipe/
➎
drain .
Note: Minimum 8" radius on silicone drain
line. Drain line from the ice machine
must have at least 1/4" per foot pitch
(6,4mm/0,3m).
§ Connect cooling water supply
§ Apply Petrol-gel to barbed drain fitting
§ Replace access panel.
➊
➌
➑
2 ft. x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
➍
3/4" MPT x 1" slip
➎
1" Stand pipe/Drain
➌
.
➍
.
➏
and return
HARMONY • RIDE Technology
Minimum 8"
radius
➊
.
➋
.
➐
➑