Follett Horizon Elite series Installation Instructions Manual page 9

exhaust
cabinet door
supplied air
intake grille
§ The supplied exhaust grille must be located at
least 18" (46 cm) from the supplied air intake grille
(exhaust air must not recirculate with intake air).
§ Cabinet interior must be open to allow for
unrestricted exhaust air flow.
§ Ice transport tube needs minimum 1/4" per foot (2
cm per meter) pitch toward ice machine and should
be secured to prevent dips and traps from forming.
HARMONY • RIDE Technology
supplied
grilles
Horizon
ice machine
18.00"
(45.7 cm) min.
24.50"
(62.2 cm)
min.
23.55"
(59.9 cm)
min.
air
in
cabinet door
must mate directly
to air intake gasket
door & gasket
must mate
directly
locating
cutout
2.00"
(5.08 cm)
cutout for supplied air intake grille
24.00" W x 15.00" H (60.96 cm x 38.1 cm)
Horizon Elite 710/1010/1410
electric
water
drain
12.00" (30.4 cm) minimum
between ice machine
and dispenser
Horizon ice machine
completed installation with
gasket and door in place –
side view
2.25"
Front
(5.7 cm)
cutout
bottom of
ice machine
side of
ice machine
§ Cabinet door must mate directly to air intake
gasket.
§ Cabinet interior must provide a minimum clear
space of 24.5" deep (62.2 cm) by 23.5" high
(59.9 cm).
§ Cutout for supplied grilles must meet minimum
size requirements shown above.
§ Utilities should be conveniently located as shown.
ice transport tube
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice
machine
secure to prevent dips
and traps from forming
see dispenser
specification
sheet for
installation
requirements
25.25" (64.1 cm) min.
23.55"
(59.9 cm)
minimum
9