6.3
Forward and reverse motion
6.4
Switching off
6.5
Compaction without extension plates
T00988GB.fm
The engine speed can be infinitely varied on the throttle control lever.
The direction of travel is determinet with the shift lever (6).
Depending on the position of the shift lever (6), the vibration plate
compacts in forward direction, at standstill or in reverse direction.
The forward and reverse speeds can be varied by selecting
intermediate positions of the shift lever (6) or the machine can be
employed for particularly intensive compaction at standstill.
Forwards
Never switch off the engine with the automatic decompression (2) as
this inevitably results in damage to the valve drive and decompression
mechanism.
Move the throttle control lever (8) to the stop.
If the vibration plates is used without extension plates, screw set of
protective screws (8 pes) into the threaded boreholes situated in the
lower mass, in order to avoid threads from being damaged.
Standstill
21
Operation
Reverse