Unpacking - PI N470 Series User Manual

4 Unpacking

4 Unpacking
INFORMATION
When handling the vacuum version of the linear actuator, attention must be paid to
appropriate cleanliness. At PI, all parts are cleaned before assembly. During assembly and
measurement, powder-free gloves are worn. Afterwards, the linear actuator is cleaned once
again by wiping and is then shrink-wrapped twice in vacuum-compatible film.
 Touch the linear actuator only with powder-free gloves.
1. Unpack the N-470 with care.
2. Compare the contents with the scope of delivery according to the contract and the
delivery note.
3. Inspect the contents for signs of damage. If any parts are damaged or missing, contact
our customer service department (p. 33) immediately.
4. Keep all packaging materials in case the product needs to be returned.
N­470 Linear Actuator MP125E Version: 1.2.0 15