Getbufferfinaldatapoint; Getbuffertriggercount - Panasonic HL-C2 Series User Manual

Chapter 2 API Function Specifications
HLC2_HANDLE hlc2Handle
DWORD dwOut
LPDWORD lpStatus
BYTE bccFlg
2
Return value
Returns HLC2_OK if normal end.

12)GetBufferFinalDataPoint

Executes buffering setting [Final data point load].
HLC2_STATUS HLC2_GetBufferFinalDataPoint(HLC2_HANDLE
hlc2Handle, DWORD dwOut, LPDWORD lpNum, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwOut
LPDWORD lpNum
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.

13)GetBufferTriggerCount

Executes buffering setting [Trigger counter readout].
HLC2_STATUS HLC2_GetBufferTriggerCount(HLC2_HANDLE hlc2Handle,
DWORD dwOut, LPDWORD lpCount, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwOut
LPDWORD lpCount
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.
Handle of device
Specifies output. (OUT1 or OUT2)
Variable pointer for storing readout
status*
* Readout status:
*lpStatus= 0: Non-buffering
Selects BCC addition
(0:BCC omit, 1:BCC add)
Handle of device
Specifies output. (OUT1 or OUT2)
Variable pointer for storing read final
data point
Selects BCC addition
(0:BCC omit, 1:BCC add)
Handle of device
Specifies output. (OUT1 or OUT2)
Variable pointer for storing Trigger
counter readout
Selects BCC addition
(0:BCC omit, 1:BCC add)
2-64
1: Wait for trigger
2: Accumulating
3: Accumulation
completed