Buffertriggerdelay; Buffereventcondition - Panasonic HL-C2 Series User Manual

Chapter 2 API Function Specifications

7)BufferTriggerDelay

IO for buffering setting [Trigger Delay]
HLC2_STATUS
DWORD dwIO, LPDWORD lpValue, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwIO
LPDWORD lpValue
2
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.

8)BufferEventCondition

IO for buffering setting [Trigger Conditions]
HLC2_STATUS HLC2_BufferEventCondition(HLC2_HANDLE hlc2Handle,
DWORD dwOUT, DWORD dwIO, LPDWORD lpSelect, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwOut
DWORD dwIO
LPDWORD lpSelect
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.
HLC2_BufferTriggerDelay(HLC2_HANDLE
Handle of device
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing Trigger Delay*
of load/setting target
* Trigger Delay
*lpNum = 0 to 100000000
Selects BCC addition
(0:BCC omit, 1:BCC add)
Handle of device
Specifies output. (OUT1 or OUT2)
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing Trigger
Conditions * of load/setting target
* Trigger Conditions
* lpSelect = 0: At timing input ON
Selects BCC addition
(0:BCC omit, 1:BCC add)
2-62
1: At HI
2: At LO
3: At HIorLO
4: When HI turns to GO
5: When LO turns to GO
6: When HIorLO turns to GO
7: At an alarm occurred
8: At an alarm released
hlc2Handle,