Sysconsolestartno; Sysconsolepanellock - Panasonic HL-C2 Series User Manual

Chapter 2 API Function Specifications

13)SysConsoleStartNo

IO for system setting [Console start-up screen]
HLC2_STATUS HLC2_SysConsoleStartNo (HLC2_HANDLE hlc2Handle,
DWORD dwIO, LPDWORD lpSelect, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwIO
LPDWORD lpSelect
2
BYTE bccFlg
For the details on start-up screen No. and other screens, refer to the below manual.
"HL-C2 Series USER'S MANUAL" - [4-3-4 System Setting] -
[Console Setting]
Return value
Returns HLC2_OK if normal end.

14)SysConsolePanelLock

IO for system setting [Console panel lock]
HLC2_STATUS HLC2_SysConsolePanelLock(HLC2_HANDLE hlc2Handle,
DWORD dwIO, LPDWORD lpSelect, BYTE bccFlg)
Argument
HLC2_HANDLE hlc2Handle
DWORD dwIO
LPDWORD lpSelect
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.
Handle of device
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing console
start-up screen* of load/setting target
* Console start-up screen:
*lpSelect = 0 to 15: Startup screen No.
Selects BCC addition
(0:BCC omit, 1:BCC add)
Handle of device
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing console
panel lock* of load/setting target
* Console panel lock selection:
*lpSelect = 0:OFF, 1:ON
Selects BCC addition
(0:BCC omit, 1:BCC add)
2-58