Panasonic HL-C2 Series User Manual page 30

Chapter 2 API Function Specifications
Class No.
10) OutFilterSelect
11) OutAverageTimes
12) OutCutOffCycle
13) OutSpan
14) OutOffsetInput
15) OutDecisionMax
16) OutDecisionMin
17) OutDecisionHisMax
2
18) OutDecisionHisMin
19) OutScalingMeasureValueA
20) OutScalingVoltageValueA
21) OutScalingMeasureValueB
22) OutScalingVoltageValueB
23) ExecAnalogScaling
24) OutAnalogOutOnAlarm
25) OutFixedValueInput
26) OutAnalogOutOnUnfixed
27) OutDegitalOutOnAlarm
28) OutAlarmDelayChange
26) OutDispDigit
30) GetMeasureValue
31) GetAlarmState
32) GetStrobeState
33) GetHighState
34) GetGoState
35) GetLowState
1) CmnSamplingCycle
2) CmnPreventInterference
3) CmnTerminalInputCtrl
4) CmnTerminalInputChattering IO for chattering prevention of terminal input
5) Get2OutMeasureValue
6) GetOutAll
7) CmnOffDaley
1) ExecOutConfigCopy
2) SysMemChangePriority
3) ExecMemChange
4) ExecMemCopy
API name
IO for Filter Operation
IO for average moving times
IO for Cutoff frequency
IO for Operation Coefficient
IO for offset
IO for judgment output: upper limit value
IO for judgment output: lower limit value
IO for judgment output: upper limit hysteresis
IO for judgment output: lower limit hysteresis
IO for analog scaling measurement value A
IO for analog scaling voltage a
IO for analog scaling measurement value B
IO for analog scaling voltage b
Executes analog scaling.
IO for analog output at alarm
IO for analog output at alarm: fixed value
IO for analog output at data unfixed
IO for digital output at alarm
IO for output alarm delay
IO for display digit of measurement value
Loads measurement value.
Loads alarm output status.
Loads strobe status.
Loads judgment output: HI status.
Loads judgment output: GO status.
Loads judgment output: LO status.
IO for sampling cycle
IO for Interference Prevention
IO for terminal input control
Loads 2 output measurement value readout.
Loads all output read.
IO for Judgment Output Off Delay
Copies setting between OUT1 and OUT2.
IO for priority setting of memory change
Specifies memory No., then executes memory
change or loads its status.
Specifies copy source and destination, then
executes memory copy.
2-12
Function