Outmeasurework - Panasonic HL-C2 Series User Manual

Chapter 2 API Function Specifications

2)OutMeasureWork

IO for OUT setting [Transparent object]
HLC2_STATUS HLC2_OutMeasureWork (HLC2_HANDLE hlc2Handle, DWORD
dwOut, DWORD dwIO,LPDWORD lpWork, BYTE bccFlg);
Argument
HLC2_HANDLE hlc2Handle
DWORD dwOut
DWORD dwIO
2
LPDWORD lpWork
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.
Handle of device
Specifies output. (OUT1 or OUT2)
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing
transparent object* of load/setting
target
* Transparent object selection
*lpWork = 0:[1st surface]
1:[2nd surface]
2:[3rd surface]
3:[4th surface]
4:[Upper limit surface]
5:[1st surface-2nd surface]
6:[1st surface-3rd surface]
7:[1st surface-4th surface]
8:[1st surface-Upper limit
9:[2nd surface-3rd surface]
10:[2nd surface-4th surface]
11:[2nd surface-Upper limit
12:[3rd surface-4th surface]
13:[3rd surface-Upper limit
14:[4th surface-Upper limit
Selects BCC addition
(0:BCC omit, 1:BCC add)
2-28
surface]
surface]
surface]
surface]