Execcaliburation; Headlaseroff - Panasonic HL-C2 Series User Manual

Chapter 2 API Function Specifications

11)ExecCaliburation

Executes head setting [Calibration]
HLC2_STATUS HLC2_ExecCaliburation (HLC2_HANDLE hlc2Handle,
DWORD dwHead, DWORD dwIO, LPDWORD lpStatus, BYTE bccFlg);
Argument
HLC2_HANDLE hlc2Handle
DWORD dwHead
DWORD dwIO
LPDWORD lpStatus
2
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.

12)HeadLaserOff

IO for head setting [Laser control]
HLC2_STATUS HLC2_HeadLaserOff (HLC2_HANDLE hlc2Handle, DWORD
dwHead, DWORD dwIO, LPDWORD lpOnOff, BYTE bccFlg);
Argument
HLC2_HANDLE hlc2Handle
DWORD dwHead
DWORD dwIO
LPDWORD lpOnOff
BYTE bccFlg
Return value
Returns HLC2_OK if normal end.
Handle of device
Specifies head. (HEADA or HEADB)
Selects IO. (1: execute)
Variable pointer for storing calibration
execution*
* Calibration command
*lpStatus= 0: No command
1: Execute
2: Cancel
Selects BCC addition
(0:BCC omit, 1:BCC add)
Handle of device
Specifies head. (HEADA or HEADB)
Selects IO. (0: load (input), 1:setting (output))
Variable pointer for storing laser
on/off* of load/setting target
* Laser control: *lpOnOff = 0:Laser on
Selects BCC addition
(0:BCC omit, 1:BCC add)
2-22
1:Laser off