Settings Menu - KaVo NOMAD PRO 2 Operator's Manual

Technique Factor time settings can be adjusted by the operator. This is done from the
main display screen by following these steps:
Press the Increase

selected.
NOTE: When the Increase
which the displayed time setting changes on screen accelerates.
Press and release the Select

Select Yes by pressing the Increase

Press the Select

Once saved, this change will be maintained in memory until overwritten or until the

factory defaults are restored through the Reset Defaults menu item.

4.10 Settings Menu

The KaVo NOMAD PRO 2 menus allow the operator to customize settings according to
individual preferences. To access the Main Menu, press and hold down the Select
button for three seconds. When the Main Menu appears, the operator can access the
desired menu item(s) by pressing the Increase
down. When the desired menu item is highlighted, press the Select
menu item.
Within the menu items there are options (such as Yes and No) which are selected using
either the Increase
Select button confirms the choice.
To exit the Main Menu, highlight Exit at the bottom of the list and then press the Select
button, or power the device off and then on.
Menu Item
System Info
Audible Sound
or Decrease buttons until the desired time setting is
or Decrease
button to activate the Save Menu.
button.
button to select OK.
or Decrease buttons. Once a selection is made, pressing the
Function
When system information is selected from the
settings menu, the device software version information
will be displayed on-screen. Pressing the Select
return the operator to the settings menu.
The volume may be adjusted by the operator. The range is from one
(softest), up to five (loudest). The Increase
buttons are used to adjust the volume, and the system emits a tone
as each volume is selected so the operator can determine the choice.
Once the desired volume is determined, pressing the Select
button saves the volume setting.
buttons are pressed and held, the rate at
and Decrease buttons to scroll up or
and Decrease
button to access the
button will
25