Instructions for use KaVo polymerisation light Poly One Table of contents Table of contents 1 User instructions ........................ 4 1.1 User guide ........................4 1.1.1 Abbreviations..................... 1.1.2 Symbols......................1.1.3 Target group ..................... 1.2 Service ......................... 4 1.3 Terms and conditions of warranty..................5 1.4 Transportation and storage.....................
Instructions for use KaVo polymerisation light Poly One 1 User instructions | 1.1 User guide 1 User instructions 1.1 User guide Requirement Read these instructions prior to first startup to avoid misuse and prevent dam- age. 1.1.1 Abbreviations Explanation brevi-...
1 User instructions | 1.3 Terms and conditions of warranty 1.3 Terms and conditions of warranty KaVo provides the final customer with a warranty that the product cited in the handover certificate will function properly and guarantees zero defects in the...
Terms and Conditions, Art. 28). Outside Germany Note KaVo shall not be held liable for damage arising from transportation. The shipment must be checked on arrival. If the packaging is visibly damaged on delivery, please proceed as follows: 1. The recipient of the package must record the loss or damage on the delivery receipt.
Page 7
Instructions for use KaVo polymerisation light Poly One 1 User instructions | 1.4 Transportation and storage Transport upright with the arrows pointing upwards! Fragile - protect against impact! Protect from moisture! Permissible stacking load Temperature range Humidity Air pressure 7 / 26...
In cases which – if not prevented – can lead to material damage. 2.2 Purpose – Proper use 2.2.1 General information This KaVo product is intended for use in dentistry only. Any other type of use is not permitted. "Proper use" includes compliance with all instructions for use and the inspection and maintenance intervals.
▪ to prevent contamination from the product 2.2.2 Product-specific The curing light Poly One is designed for the curing of dental materials in the oral cavity of a patient in the course of a dental treatment. For installation on dental treatment centres; the use is restricted to medical specialist staff in rooms used for medical purposes.
International For country-specific information on disposal, contact your specialised dealers. 2.3 Safety instructions 2.3.1 General information DANGER Explosion hazard. Risk of fatal injury. ▶ Do not use KaVo product in areas subject an explosion hazard. 10 / 26...
▶ Perform regular proper care and servicing! The following persons are authorised to conduct repairs and servicing and the safety check on the KaVo product: ▪ Technicians of KaVo branch offices after appropriate product training. ▪ Specifically KaVo-trained technicians of KaVo franchised dealers. Decommissioning WARNING Dispose of the product in appropriate manner.
Page 12
Instructions for use KaVo polymerisation light Poly One 2 Safety | 2.3 Safety instructions NOTICE Product damage from improper cleaning. The handpiece surface, light exit aperture or light inlet aperture may become damaged. ▶ Do not use abrasives or aggressive cleansers! ▶...
DIN 4844-2 ⑬ CE mark according to 93/42/EEC medical devices The curing light Poly One emits visible blue light of a wavelength between 450 to 460 nm for photopolymerisation of dental materials. 13 / 26...
Instructions for use KaVo polymerisation light Poly One 3 Description of the Product | 3.1 Technical Specifications 3.1 Technical Specifications Light source Sterilisable parts Fibre-optic cable made of glass Wavelengths 450 - 460 nm Peak wavelength 457 nm Curing times...
Page 15
Instructions for use KaVo polymerisation light Poly One 3 Description of the Product | 3.1 Technical Specifications Transportation and storage conditions Ambient temperature -20 to +55 Relative Humidity 5% to 95% non-condensing Air pressure 700 hPa to 1,060 hPa 15 / 26...
4 Commissioning 4 Commissioning Note Use the curing light Poly One with glare protection only. ▶ Slide the glare protection onto the optical fibre until it hits against the limit stop. ▶ Insert the optical fibre into the handpiece until it hits against the limit stop.
Keep a minimum distance of 0.5 cm from the material to exclude possible damage or hazards. The following curing times are available for selection: ▪ 20 seconds ▪ 40 seconds ▪ 60 seconds Note The curing light Poly One shuts off automatically once the selected time is elapsed. 17 / 26...
Page 18
Instructions for use KaVo polymerisation light Poly One 5 Operation ▶ Press button briefly to set the curing time to 20 seconds. ð Curing light is on for 20 seconds and then shuts off. ▶ Press button until you hear two acoustical signals to set the curing time to 40 seconds.
▶ Do not wash the curing light Poly One in the washer disinfector. ▶ Do not sterilise the curing light Poly One in the hot-air steriliser. ▶ Do not place the curing light Poly One in a disinfection or ultrasonic bath. Note For cleaning/reprocessing of the fibre-optic cable of the curing light Poly One, the fibre-optic cable must be removed from the handpiece.
Instructions for use KaVo polymerisation light Poly One 6 Reprocessing methods according to ISO 17664 | 6.2 Disinfection ▶ Immediately remove contamination from materials used in the dental office using a soft cloth and alcohol. ▶ Clean the handpiece with a soft, moist cloth.
Instructions for use KaVo polymerisation light Poly One 6 Reprocessing methods according to ISO 17664 | 6.4 Sterilisation 6.3.2 Automatic Drying Not applicable. 6.4 Sterilisation Note The fibre-optic cable can be subjected to sterilisation. Sterilization in a steam sterilizer in compliance with DIN...
Instructions for use KaVo polymerisation light Poly One 7 Troubleshooting 7 Troubleshooting Note If disturbance arises, a technician authorised by KaVo must be engaged for the remedial action. Malfunction Cause Remedy ▶ See: Instructions for use of the treatment Nothing works...
Instructions for use KaVo polymerisation light Poly One 8 Accessories and spare parts | 6.5 Storage 8 Accessories and spare parts Material number Accessories 3.000.3812 Fibre-optic cable 3.000.3811 Protective shield 3.000.4240 O-ring 23 / 26...