Initiating And Completing An X-Ray Exposure; Powering Off - KaVo NOMAD PRO 2 Operator's Manual

4.5 Initiating and Completing an X-ray Exposure

To begin the exposure, press and
hold the trigger. The Ready alert is
replaced with the X-rays On alert,
the green LED is replaced with a
yellow LED, and there is an alert tone
for the duration of the exposure.
To ensure complete exposure, keep
the trigger depressed until the audible
tone is complete, the yellow LED is off,
and the X-ray Complete alert briefly
displays. The device then returns to
the at-rest state.
NOTE: An exposure can be
terminated for any reason by
prematurely releasing the depressed
trigger.

4.6 Powering Off

Press and release the Power
The KaVo NOMAD PRO 2 also automatically shuts off after approximately three minutes of
inactivity.
The KaVo NOMAD PRO 2 display darkens, accompanied by a tone to indicate shut-down.
Enabling X-rays Alert
button to turn KaVo NOMAD PRO 2 off.
Ready Alert
21