How To Turn The Power On/Off; Turn On/Off The Power; Lock The Key Operation; How To Adjust The Display Brilliance - Furuno MU-190V Operator's Manual

3.2

How to Turn the Power On/Off

3.2.1

Turn on/off the power

How to turn on/off the power depends on the setting of the slide switch. The slide switch is set
when the monitor unit is installed. See section 1.5.
Note: The screen refreshes slower in low ambient temperature.
Slide switch "ON"
The external equipment connected to the DVI port (DVI-D1 or DVI-D2) can turn on/off the monitor
unit. See the operator's manual for the external equipment connected.
Note 1: You can not turn on the power with the
Note 2: When you connect equipment to both DVI-D1 and DVI-D2 ports, turn off the power of the
equipment to turn off the monitor unit.
Slide switch "OFF"
1. Press the /BRILL key to turn on the monitor unit.
2. Press and hold the
to turn off the monitor unit. While you hold the key,
the message shown right appears.
3.2.2

Lock the key operation

You can lock the monitor unit to prevent operation. Any key (except the
operative.
1. While you hold the PIP key, turn on the monitor unit. Press and hold the PIP key for more than
five seconds.
Note: When the slide switch is ON, turn on the connected external equipment while pressing
the PIP key to turn on the monitor unit.
2. To cancel the lock, turn off the monitor unit and then turn it on while you hold the PIP key.
Press and hold the PIP key more than five seconds.
3.3

How to Adjust the Display Brilliance

You can adjust the display brilliance as follows:
Note: This function is available when [AUTO DIMMER] on the [SYSTEM] menu is [OFF] and [EXT
BRILL CTRL] on the [SYSTEM] menu is [OFF]. See section 3.6.
1. Press the /BRILL key momentarily to show the
BRILL adjustment window shown right. This window
disappears if there is no operation for five seconds.
2. Press the or
3. Press the or
/BRILL key for three seconds
key to adjust the brilliance (setting range: 1 - 50).
key to close the window.
/BRILL key on the monitor unit.
This monitor will shut down in three seconds.
BRILL
14
3. OPERATION
SHUT DOWN
/BRILL key) will be in-
46