Video Composite Signal Setting - Furuno MU-190V Operator's Manual

Menu item
V_POSITION
H_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS*
*: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
2.2

Video Composite Signal Setting

You can adjust the VIDEO signal from the VIDEO port. The VIDEO signal is also displayed in the
PIP window (see section 3.5).
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the or
The [VIDEO] menu shown right appears.
4. Press the or
adjust.
5. Press the or
6. Press the MENU key to close the menu.
Move the image position vertically.
(upward), (downward)
Move the image position horizontally.
(leftward), (rightward)
Adjust the red color level.
(weaken), (strengthen)
Adjust the green color level.
(weaken), (strengthen)
Adjust the blue color level.
(weaken), (strengthen)
Adjust the color temperature.
(strengthen the red color level),
(strengthen the blue color level)
Emphasize the black color.
[OFF] (standard), (weaken),
Emphasize the white color.
[OFF] (standard), (weaken),
Select the display method.
[FULL]: Show the input signal on entire screen.
[NORMAL]: Show the input signal with original aspect ratio.
Sharpen the edges horizontally.
(soften characters and lines),
(sharpen characters and lines)
key to select [VIDEO].
key to select the menu item to
key to adjust the setting.
Function
(strengthen)
(strengthen)
RGB DVI1
PIP_SIZE
CONTRAST
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
10
2. ADJUSTMENTS
Setting
1 to 99 (RGB),
1 to 50 (DVI1,
DVI2)
1 to 40
1 to 64
1 to 64
1 to 64
[5500K],
[6500K],
[7000K],
[8000K]
[OFF], 1 to 10
[OFF], 1 to 10
[FULL],
[NORMAL]
1 to 10
DVI2 VIDEO OSD SYSTEM
5 (1~10)
32 (1~64)
31 (1~64)
31 (1~64)
31 (1~64)
7000K (5500K/6500K/7000K/8000K)
OFF (OFF, 1~10)
OFF (OFF, 1~10)