How To Turn On/Off The Power - Furuno RD-50 Operator's Manual

Hide thumbs Also See for RD-50:

Table of Contents

1.2

How to Turn On/Off the Power

Turn on the power

Press the PWR key to turn on the power. The initialization screen appears followed by

the start-up screen. The start-up screen shows the unit name, serial number, program

number and the results of the ROM and RAM check, OK or NG (No Good). If NG ap-

pears, contact your dealer.

After the self-tests are completed, the last-used data screen (see section 1.4) ap-

pears.

Note 1: The screen refreshes slower in low temperature ambient.

Note 2: The view angle at nighttime is narrower than at daytime.

Now Initializing ...

STARTER VERSION 2651006-XX.XX

BOOTER VERSION 2651007-XX.XX

XX.XX: Program version number

Initialization screen

XXXX: Serial number

XX.XX: Program version number

Start-up screen

XXXX

XX.XX

1. BASIC OPERATION

1-3

Table of Contents