Furuno MU-190V Operator's Manual page 12

1. MOUNTING, WIRING
5. Screw the wing bolts and the wing nuts of the flush mount fixture so that the protector moves
to the mounting plate.
Flush Mount Fixture 19
6. Fasten the flush mount fixture 19 to the right and
left sides of the rear of the monitor unit with the
pan head screws (6 pcs.).
7. Fasten each wing bolt so that the protector touch-
es the mounting panel.
8. Fasten the wing bolts tightly to secure the monitor
unit, in the order shown right.
9. Fasten the wing nuts tightly.
Wing Nut
3
Wing Bolt
Fixing Plate
Protector
Move to the fixture.
Pan Head Screw
Flush Mount
Fixture 19
Wing bolts
(6 places)
Wing Bolt
Wing Nut
Fixing Plate
Protector
Mounting
Panel