Touchscreen Interface - Tektronix AWG5200 Series Installation And Safety Instructions

Operation basics
Connector
USB Host
LAN
Power
Marker outputs
Sync In
Sync Out
Clock Out
Clock In
Ref In
10 MHz Ref Out

Touchscreen interface

The arbitrary waveform generator offers a touchscreen interface that you can use to access all features and controls.
Enable or disable the touchscreen interface via the user Preferences on the Utilities tab.
When the touchscreen is enabled, you can use your finger or a stylus to control all operations of the instrument from the display.
The touchscreen can be used alone or in combination with a mouse and front-panel controls.
24
Description
Four USB3 Host connectors (type A) to connect devices such as a mouse, keyboard, or other USB devices.
Tektronix does not provide support or device drivers for USB devices other than the optional mouse and
keyboard.
RJ-45 connector to connect the instrument to a network.
Power cord input.
SMA type output connectors for marker signals. Four per channel.
These outputs are affected by the All Outputs Off state.
SMA type connector to use a synchronization signal from another AWG5200 series instrument.
Connector for future enhancement.
SMA type connector to provide a high speed clock that is related to the sample rate.
This output is not affected by the All Outputs Off state.
SMA type connector to provide an external clock signal.
SMA type input connector to provide a reference timing signal (variable or fixed).
SMA type output connector to provide a 10 MHz reference timing signal.
This output is not affected by the All Outputs Off state.
AWG5200 Series Installation and Safety Instructions