Figure 4-37 Secure Anchor; Figure 4-38 Installing External Battery - NEC Xen Master System Hardware Manual

NEC Australia Pty Ltd
4 - 82
3. Secure the supplied anchor on top of the

Figure 4-37 Secure Anchor

4. Install KSU on top of the anchor. For the
3.10.3 Installing External Battery in EBB Box

Figure 4-38 Installing External Battery

Xen Master & Xen Axis
battery box as shown in the diagram using
the 4 x 6mm screws supplied.
installation procedure, see steps 2 and 3 of
section 3.2, "Installing Basic Unit to Floor".
Installing KSUs