Quick Commissioning With Default Settings - Festo VABF-S4-1-V2B1 series Operating Instructions Manual

VABF-S4-1-V2B1...
5

Quick commissioning with default settings

The pressure switch of the vacuum module has the following settings when delivered:
Channel A, air-saving function
• Switching characteristics:
• Switching point
• Hysteresis:
• Switching characteristic:
Channel B, vacuum query
• Switching characteristics:
• Switching point
• Hysteresis:
• Switching characteristic:
If you do not want to use these settings, you can set a switching point for Out A or Out B manually
( section 6.3.2).
50
Threshold value comparator
–700 mbar
200 mbar
NO (normally open contact)
Threshold value comparator
–400 mbar
5 mbar
NO (normally open contact)
Festo – VABF-S4-1-V2B1...-D2 – 1212a English